DEB CORPORATION (Plant Closed)
Return to Previous PageComplete Large Capacity Machine Shop And Repair Facility Including Large Lathes, Welding, Grinders And Real Estate
WEBCAST BIDDER INSTRUCTIONS
- All Internet bidders must register for this auction at www.bidspotter.com at least 48-Hours Prior to the Sale Date, if you do not you will not be approved.
- All Internet bidders must Post a Deposit of Approx. 25% of Your Planned Spending Budget or $5,000.00 Minimum with Cincinnati Industrial Auctioneers in Order to be approved to Bid. Those who do Not Post the Deposit Will Not be Approved. Period.
- Only Major Items Will be Available for Online Bidding. Please refer to the Listing on www.bidspotter.com for Available Online Items.
- There is a 15% Buyer’s Premium in Effect for All Online Purchases.
- We Highly Recommend that Potential Buyers Attend this Auction & Bid Live Onsite. This will give you the Ability to Inspect the Items & Fully Appreciate Their Condition, Along with Saving You 3% of the Buyer’s Premium.
No Last Minute Registrations will be accepted. Make Sure to Register & Post Your Deposit No Later than 48-Hours Prior to the Start of the Auction.
Directions: From Birmingham, AL Proceed North On I-59 Towards Trussville, Al. Continue On I-59 North Approx. 12 Miles To Exit 143 Deerfoot Pkwy. Turn South(Left) Onto Deerfoot Pkwy And Proceed 2 Miles. Deerfoot Pkwy Changes To Camp Coleman Road After US-11. Proceed To Sale Site On Right Immediately After US-11 And Train Tracks. Watch For Auction Signs And Auction Parking.
Inspection:
March 14, 2012 (11:00 AM ET - 5:00 PM ET)
Address:
4628 CAMP COLEMAN ROAD, TRUSSVILLE, AL, 35173, USEnter an address to get directions to the sale:
Bidspotter Link:
To view this live auction please follow this link:
http://www.bidspotter.com/forms/event.php?event=16643
Documents
69 Featured Items
32” X 120” KURAKI Model LC-403-30 Hollow Spindle Geared Head Engine Lathe
Name: 32” X 120” KURAKI Model LC-403-30 Hollow Spindle Geared Head Engine Lathe
Manufacturer: KURAKI
Model: Model LC-403-30
Year:
Quantity: 1
Description:
32” X 120” KURAKI Model LC-403-30 Hollow Spindle Geared Head Engine Lathe; S/N 260, 12 ½” Spindle Bore, 32” Swing Over Bed, 20” Swing Over Cross Slide, 120” Distance Between Centers, Front and Rear 24” 4-Jaw Chucks, 30 HP Drive Motor, 350 RPM Spindle Speed, Inch Threading, Quick Change Tool Post, Taper Attachment, Idler Roller, Chasing Dial, Steady Rest, Repaired and Refurbished by Horizon Industrial Services at Cost of $80,000 in 2006, Call for Rebuild Invoice (Mfg. 1981 / Rebuilt 2006)
32” X 120” KURAKI Model LC-403-30 Hollow Spindle Geared Head Engine Lathe
Name: 32” X 120” KURAKI Model LC-403-30 Hollow Spindle Geared Head Engine Lathe
Manufacturer: KURAKI
Model: Model LC-403-30
Year:
Quantity: 1
Description:
32” X 120” KURAKI Model LC-403-30 Hollow Spindle Geared Head Engine Lathe; S/N N/A, 12 ½” Spindle Bore, 32” Swing Over Bed, 20” Swing Over Cross Slide, 120” Distance Between Centers, 24” and 28” (Front and Rear) 4-Jaw Chucks, 30 HP Drive Motor, 350 RPM Spindle Speed, Inch Threading, Quick Change Tool Post, Taper Attachment, Idler Roller, Chasing Dial, Steady Rest, Machine Currently Disassembled, Partially Repaired and Refurbished by Horizon Industrial Services in 2006 Prior to Shut Down (Mfg. 1981 / Partially Rebuilt 2006)
25” X 120” Dean Smith & Grace Model 25P Hollow Spindle Geared Head Engine Lathe
Name: 25” X 120” Dean Smith & Grace Model 25P Hollow Spindle Geared Head Engine Lathe
Manufacturer: Dean Smith & Grace
Model: Model 25P
Year:
Quantity: 1
Description:
25” X 120” DEAN SMITH & GRACE Model 25P Hollow Spindle Geared Head Engine Lathe; S/N 41339, 10 7/8” Spindle Bore, 25” Swing Over Bed, 14” Swing Over Cross Slide, 120” Distance Between Centers, 26” Front and Rear 4-Jaw Chucks, 290 RPM Spindle Speed, Inch Threading, Taper Attachment, Quick Change Tool Post, 20 HP Drive Motor, (2) Idler Rollers, Repaired and Refurbished by Horizon Industrial Services in 2007 at Cost of Approx. $30,000 Call for Rebuild Invoice (Rebuilt 2007)
52” X 720” (60’) Leblond Dual Carriage Geared Head Engine Lathe
Name: 52” X 720” (60’) Leblond Dual Carriage Geared Head Engine Lathe
Manufacturer: Leblond
Model:
Year:
Quantity: 1
Description:
52” X 720” (60’) LEBLOND Dual Carriage Geared Head Engine Lathe; S/N NR40, 3” Spindle Bore, 52” Swing Over Bed, 32” Swing Over Cross Slide, 672” Distance Between Centers, 47” 4-Jaw Chuck, 165 RPM Spindle Speed, Inch Threading, (2) Carriages (1) w/ Taper, (3) Stead Rests, Tailstock
40” / 52” X 320” Poreba Model TR-100B1/8M Geared Head Gap Bed Engine Lathe
Name: 40” / 52” X 320” Poreba Model TR-100B1/8M Geared Head Gap Bed Engine Lathe
Manufacturer: Poreba
Model: Model TR-100B1/8M
Year:
Quantity:
Description:
40” / 52” X 320” POREBA Model TR-100B1/8M Geared Head Gap Bed Engine Lathe; S/N 1191-192, 4.5” Spindle Bore, 40” Swing Over Bed, 52” Swing In Gap, 27” Swing Over Cross Slide, 320” Distance Between Centers, 630 RPM Spindle Speed, Metric & Inch Threading, Taper Attachment, Chasing Dial, (5) Steady Rests, 17” Face Plate, 40 KW Drive Motor (New 1978)
34” X 320” Leblond Dual Carriage Geared Head Engine Lathe
Name: 34” X 320” Leblond Dual Carriage Geared Head Engine Lathe
Manufacturer: Leblond
Model:
Year:
Quantity:
Description:
34” X 320” LEBLOND Dual Carriage Geared Head Engine Lathe; S/N N/A, 34” Swing Over Bed, 22” Swing Over Cross Slides, 320” Distance Between Centers, 2 Spindle Bore, 25” 4-Jaw Chuck, (2) Carriages, 25 HP Motor, Currently Not In Service
27” X 120” Romi Model M27 Flat Bed CNC Lathe
Name: 27” X 120” Romi Model M27 Flat Bed CNC Lathe
Manufacturer: Romi
Model: Model M27
Year: 2004
Quantity: 1
Description:
27” X 120” ROMI Model M27 Flat Bed CNC Lathe; S/N 002-088870-405, Fanuc Series 21i-T CNC Control, 27” Swing Over Bed, 16.9” Swing Over Cross Slide, 120” Distance Between Centers, 4.1” Spindle Bore, 14.2” X-Axis, 120” Z-Axis, 15” Atlas 3-Jaw Chuck, 1800 RPM Spindle Speed, 30 HP Motor8-Position Duplomatic Tool Turret, Kabel Schlepp Chip Conveyor, 19” Atlas 4-Jaw Chuck, Approx. 370 Run Time Hours Showing Auctioneer Unsure of Accuracy (New 2004)
Cincinnati Milacron Model Hawk 250-A2100ERD CNC Turning Center
Name: Cincinnati Milacron Model Hawk 250-A2100ERD CNC Turning Center
Manufacturer: Cincinnati Milacron
Model: Model Hawk 250-A2100ERD
Year: 1998
Quantity: 1
Description:
CINCINNATI MILACRON Model Hawk 250-A2100ERD CNC Turning Center; S/N 7060A00980032, Acramatic 2100 CNC Control, 10” SMW Chuck, 27.1” Max Turn Length, 20.8” Max Swing Over Bed, 13.7” Max Turn Dia. (STD Tooling), 10.6” X-Axis, 27.1” Z-Axis, 3,300 RPM Spindle Speed, 12-Position Turret, 3” Bar Chuck Capacity, Coolant System, Chip Conveyor (New 1998)
Sodick Model A-530D AWT CNC Wire Cut EDM
Name: Sodick Model A-530D AWT CNC Wire Cut EDM
Manufacturer: Sodick
Model: Model A-530D AWT
Year: 1995
Quantity: 1
Description:
SODICK Model A-530D AWT CNC Wire Cut EDM; S/N T-2253, Fine Sodick EX21 CNC Control, 19.6” X-Axis, 12.5” Y-Axis, 10.6” Z-Axis, 35.4”W X 23.6”L X 10.2” Max Work Piece Dimensions, 7” Max Work Piece Submerged Cutting, 0.1 – 0.3 MM Wire Diameter, Auto Wire Threading, Dielectric Fluid System (New 1995)
34” X 350” Leblond Dual Carriage Geared Head Polishing Engine Lathe
Name: 34” X 350” Leblond Dual Carriage Geared Head Polishing Engine Lathe
Manufacturer:
Model:
Year:
Quantity: 1
Description:
34” X 350” LEBLOND Dual Carriage Geared Head Polishing Engine Lathe; S/N N/A, 34” Swing Over Bed, 22” Swing Over Cross Slide, 350” Distance Between Centers, 25” 4-Jaw Chuck, (2) Carriages w/ 2” Baldor Belt Sanders, 255 RPM Spindle Speed, 25 HP Main Drive Motor, Steady Rest, Neoprene Idler Rollers
AAF International Model N Roto Clone Dust Collector; S/N 01-3322
Name: AAF International Model N Roto Clone Dust Collector; S/N 01-3322
Manufacturer: AAF
Model: Model N Roto Clone
Year:
Quantity: 1
Description:
AAF International Model N Roto Clone Dust Collector; S/N 01-3322
56’ Long Mfg. Unk. Dual Traveling Head Weld Build Up Lathe
Name: 56’ Long Mfg. Unk. Dual Traveling Head Weld Build Up Lathe
Manufacturer: Long Mfg
Model:
Year:
Quantity: 1
Description:
56’ LONG MFG.. Unk. Dual Traveling Head Weld Build Up Lathe; American Motorized Head Stock w/ Baldor Variable Speed Motor Control, 2 HP Drive Motor, (2) Lincoln Model NA-5 Self Traveling Welding Heads, (2) 1,500 Amp Lincoln Idealarc DC-1500 Welding Power Supplies w/ Wire Feeds, (3) Idler Rolls, (2) 13’ Pre-Heat Tubes, 10’ Pre-Heat Tube, 6’ Pre-Heat Tube
15’ Long Mfg. Unk. Weld Build Up Lathe
Name: 15’ Long Mfg. Unk. Weld Build Up Lathe
Manufacturer: Long Mfg
Model:
Year:
Quantity:
Description:
15’ LONG MFG. Unk. Weld Build Up Lathe; S/N N/A, Motorized Headstock Unit, 16” 3-Jaw Chuck, Motor Master 100 Variable Speed Motor Control, 1 HP Scott Drive Motor, PB Control Panel, Idler Rolls, 12’ Pre-Heat Tube, 17” Rubber Belt Conveyor
12” X 48” Cincinnati Universal O.D. Cylindrical Grinder
Name: 12” X 48” Cincinnati Universal O.D. Cylindrical Grinder
Manufacturer: Cincinnati
Model:
Year:
Quantity:
Description:
12” X 48” CINCINNATI Universal O.D. Cylindrical Grinder; S/N 20315R3, Drop Down I.D. Spindle, 1 ½” Thick X 12” Dia. Grinding Wheel, 8” 4-Jaw Chuck, (4) Work Rests, (3) Extra I.D. Spindles, 3 HP Main Wheel Motor, 1 HP Work Head Motor, Coolant System
Micro Air Model OM-500 Dust Collector
Name: Micro Air Model OM-500 Dust Collector
Manufacturer:
Model: Model OM-500
Year:
Quantity: 1
Description:
MICRO AIR Model OM-500 Dust Collector
Mfg. Unknown Traveling Head Hydraulic Straightening Press; 3’ X 17’ Table, 15 HP Hydraulic Motor, Pendant Control
Name: Mfg. Unknown Traveling Head Hydraulic Straightening Press; 3’ X 17’ Table, 15 HP Hydraulic Motor, Pendant Control
Manufacturer:
Model:
Year:
Quantity:
Description:
Mfg. Unknown Traveling Head Hydraulic Straightening Press; 3’ X 17’ Table, 15 HP Hydraulic Motor, Pendant Control
18” Marvel Model 8-Mark-II Tilt Frame Vertical Band Saw
Name: 18” Marvel Model 8-Mark-II Tilt Frame Vertical Band Saw
Manufacturer: Marvel
Model: Model 8-Mark-II
Year:
Quantity: 1
Description:
18” MARVEL Model 8-Mark-II Tilt Frame Vertical Band Saw; S/N 828809, 450 Ft/Min Blade Speed, 10’ Infeed Conveyor, 10’ Outfeed Conveyor, Coolant System, PB Control
18” X 78” Monarch Geared Head Engine Lathe
Name: 18” X 78” Monarch Geared Head Engine Lathe
Manufacturer: Monarch
Model:
Year:
Quantity: 1
Description:
18” X 78” MONARCH Geared Head Engine Lathe; S/N 33345, 18” Swing Over Bed, 10” Swing Over Cross Slide, Chasing Dial, 800 RPM, Inch Threading, Quick Change Tool Post, 12” 3-Jaw Chuck, 16” 4-Jaw Chuck, Mitutoyo UDR-220 DRO
3 HP YCI Supermax Model YCM-16VS Variable Speed Vertical Milling Machine
Name: 3 HP YCI Supermax Model YCM-16VS Variable Speed Vertical Milling Machine
Manufacturer: YCI Supermax
Model: Model YCM-16VS
Year:
Quantity: 1
Description:
3 HP YCI SUPERMAX Model YCM-16VS Variable Speed Vertical Milling Machine; S/N 1053818, 9” X 49” Table, 4200 RPM Spindle, X-Axis Power Table Feed
2 HP Bridgeport Variable Speed Vertical Milling Machine
Name: 2 HP Bridgeport Variable Speed Vertical Milling Machine
Manufacturer: BRIDGEPORT
Model:
Year:
Quantity: 1
Description:
2 HP Bridgeport Variable Speed Vertical Milling Machine; S/N 281515, 9” X 48” Table, Power Draw Bar, Newall DRO, X-Axis Power Table Feed
6’ Arm X 19” Column Fosdick Radial Arm Drill;, 1800 RPM Spindle Speed, 24”W X 30”L X 19” High Drill Box
Name: 6’ Arm X 19” Column Fosdick Radial Arm Drill;, 1800 RPM Spindle Speed, 24”W X 30”L X 19” High Drill Box
Manufacturer:
Model:
Year:
Quantity: 1
Description:
6’ Arm X 19” Column Fosdick Radial Arm Drill; S/N N/A, 1800 RPM Spindle Speed, 24”W X 30”L X 19” High Drill Box
K.O. Lee Model B360 Tool Cutter & Grinder; S/N 9489-366
Name: K.O. Lee Model B360 Tool Cutter & Grinder; S/N 9489-366
Manufacturer:
Model:
Year:
Quantity:
Description:
K.O. lEE Model B360 Tool Cutter & Grinder; S/N 9489-366
DAREX Model BK-65 Precision Drill Sharpener
Name: DAREX Model BK-65 Precision Drill Sharpener
Manufacturer:
Model:
Year:
Quantity:
Description:
DAREX Model BK-65 Precision Drill Sharpener
Darex Drill Sharpener
Name: Darex Drill Sharpener
Manufacturer: Darex
Model:
Year:
Quantity:
Description:
DAREX Drill Sharpener
Misc. Machinery
Name: Misc. Machinery
Manufacturer:
Model:
Year:
Quantity:
Description:
Misc. Machinery Consisting of; (4) Milwaukee and Black and Decker Magnetic Base Drills, Hydraulic Electric H-Frame Press; Enerpac Model PER-3042 Hydraulic Unit, 21” Rutland Model 2666-5500 Floor Drill; 12” X 16” Table, 15” Abrasive Chop Saw,
8” Mfg. Unknown Tile Saw, Coral Portable Dust Collector, Alkota Portable Steam Cleaner; S/N 149277, 100 Ton Powerteam Portable Hydraulic Unit w/ Cylinder Jack, (2) 15 HP Hydraulic Units
Large Quantity of Inspection Equipment Consisting of
Name: Large Quantity of Inspection Equipment Consisting of
Manufacturer:
Model:
Year:
Quantity: 1
Description:
Large Quantity of Inspection Equipment Consisting of; Skidmore Wilhelm Model ML Bolt Tension Calibrator; S/N 13354, Parker Research Model DA-200 Mig Particle Test Kit; S/N 12632, KTA – Tator Model M/1 Tester, Proceq Equo Tip Portable Hardness Tester, Mitutoyo Surface Tester, Holdridge Model 8D Radii Cutter, 33”W X 44”L X 8.5” Thick Trustone Grade A Granite Surface Plate w/ Stand, Elcometer 246 Thickness Tester, Elcometer 345 Thickness Tester, Barnant Platinum Thermometer, Micrometers by Fowler & Starrett up to 20”, Dial Type Bore Gauges up to 16”, Gauge Block Sets, Gauge Block Accessory Set, 80” Vernier Caliper, 40” Vernier Calipers, Various Size Calipers, Standards, Micrometer Sets, (2) 26” Mitutoyo Dial Type Height Gauges, Stuhr Wheel Balancer, Starrett Precision Lave, Pin Gauges & Other Related Items
Large Quantity of Shop Equipment Consisting of
Name: Large Quantity of Shop Equipment Consisting of
Manufacturer:
Model:
Year:
Quantity:
Description:
Large Quantity of Shop Equipment Consisting of; Maintenance Department, Pallet Trucks, D.E. Grinder, 2” Belt Sander, Portable Infrared Heaters, Torpedo Heaters, Electric Hand Tools, Hand Tools, Torch Carts, Shop Ladders, Pedestal Fans, Dump Hoppers, Push Mower, (2) ¾” Pneumatic Impact Guns, Pneumatic Hand Tools, C-Clamps, Extension Ladders, Building and Machine Maintenance Parts and Other Related Items
10’ W X 8’ L X 8’ High Porta-King Modular Shop Office; (1) Man Door, A/C Unit
Name: 10’ W X 8’ L X 8’ High Porta-King Modular Shop Office; (1) Man Door, A/C Unit
Manufacturer:
Model:
Year:
Quantity:
Description:
10’ W X 8’ L X 8’ High Porta-King Modular Shop Office; (1) Man Door, A/C Unit
Office Equipment Consisting of
Name: Office Equipment Consisting of
Manufacturer:
Model:
Year:
Quantity: 1
Description:
Office Equipment Consisting of; Nec Model DX7NA-48 Phone System w/ (25) Phones, 24” Mutoh XP-500 Series Intelligent Plotter, HP Officejet 7310 All-In-One Printer, Konica Model 7145 Copier, Executive Office Furniture, File Cabinets, Lateral File Cabinets, Blueprint File Cabinets, Modern L-Shaped Desks, Two-Door Storage Cabinets, Drafting Table, Folding Tables, Chairs and Many Other Related Items
Large Quantity of Inspection Equipment Consisting of
Name: Large Quantity of Inspection Equipment Consisting of
Manufacturer:
Model:
Year:
Quantity:
Description:
Large Quantity of Inspection Equipment Consisting of; Skidmore Wilhelm Model ML Bolt Tension Calibrator; S/N 13354, Parker Research Model DA-200 Mig Particle Test Kit; S/N 12632, KTA – Tator Model M/1 Tester, Proceq Equo Tip Portable Hardness Tester, Mitutoyo Surface Tester, Holdridge Model 8D Radii Cutter, 33”W X 44”L X 8.5” Thick Trustone Grade A Granite Surface Plate w/ Stand, Elcometer 246 Thickness Tester, Elcometer 345 Thickness Tester, Barnant Platinum Thermometer, Micrometers by Fowler & Starrett up to 20”, Dial Type Bore Gauges up to 16”, Gauge Block Sets, Gauge Block Accessory Set, 80” Vernier Caliper, 40” Vernier Calipers, Various Size Calipers, Standards, Micrometer Sets, (2) 26” Mitutoyo Dial Type Height Gauges, Stuhr Wheel Balancer, Starrett Precision Lave, Pin Gauges & Other Related Items
Large Quantity of Shop Equipment Consisting of;
Name: Large Quantity of Shop Equipment Consisting of;
Manufacturer:
Model:
Year:
Quantity:
Description:
Large Quantity of Shop Equipment Consisting of; Maintenance Department, Pallet Trucks, D.E. Grinder, 2” Belt Sander, Portable Infrared Heaters, Torpedo Heaters, Electric Hand Tools, Hand Tools, Torch Carts, Shop Ladders, Pedestal Fans, Dump Hoppers, Push Mower, (2) ¾” Pneumatic Impact Guns, Pneumatic Hand Tools, C-Clamps, Extension Ladders, Building and Machine Maintenance Parts and Other Related Items
10’ W X 8’ L X 8’ High Porta-King Modular Shop Office; (1) Man Door, A/C Unit
Name: 10’ W X 8’ L X 8’ High Porta-King Modular Shop Office; (1) Man Door, A/C Unit
Manufacturer:
Model:
Year:
Quantity:
Description:
10’ W X 8’ L X 8’ High Porta-King Modular Shop Office; (1) Man Door, A/C Unit
Office Equipment Consisting of
Name: Office Equipment Consisting of
Manufacturer:
Model:
Year:
Quantity:
Description:
Office Equipment Consisting of; Nec Model DX7NA-48 Phone System w/ (25) Phones, 24” Mutoh XP-500 Series Intelligent Plotter, HP Officejet 7310 All-In-One Printer, Konica Model 7145 Copier, Executive Office Furniture, File Cabinets, Lateral File Cabinets, Blueprint File Cabinets, Modern L-Shaped Desks, Two-Door Storage Cabinets, Drafting Table, Folding Tables, Chairs and Many Other Related Items
Cincinnati Model No. 3 EA Thru-Feed Centerless Grinder
Name: Cincinnati Model No. 3 EA Thru-Feed Centerless Grinder
Manufacturer: CINCINNATI
Model: Model No. 3 EA
Year:
Quantity:
Description:
CINCINNATI Model No. 3 EA Thru-Feed Centerless Grinder; S/N 3M3H1J-134, DeB Personnel Said Machine Capacity is 2” – 12” Dia., Approx. 43’ Infeed and 43’ Outfeed Roller Rack Stands, ½” – 6” Dia. Capacity (Depending on Workrest), 4-3/4” Dia. X 7-1/2” Long Grinding Wheel Spindle, 4” Dia. X 5-1/2” Long Regulating Wheel Plain Bearing at Front, 2-5/8” Dia. X 3-3/4” Long Regulating Wheel Plain Bearing at Rear, 24” Dia. X 12” Hole X 4” – 10” Face Grinding Wheel, 14” Dia. X 5” Hole X 4” – 10” Face Regulating Wheel, Hydraulic Contour Truing on Regulating and Grinding Wheels, New 50 HP Spindle Motor, Coolant Tank and Pump, Reconditioned By Grinders Clearing House 2004 at Cost of $40,000 Call for Rebuild Invoice (Reconditioned 2005)
Cincinnati Model No. 3 EA Thru-Feed Centerless Grinder
Name: Cincinnati Model No. 3 EA Thru-Feed Centerless Grinder
Manufacturer: CINCINNATI
Model: Model No. 3 EA
Year:
Quantity: 1
Description:
Cincinnati Model No. 3 EA Thru-Feed Centerless Grinder; S/N R6003-4, DeB Personnel Said Machine Capacity is 2” – 12” Dia., Approx. 43’ Infeed and 43’ Outfeed Roller Rack Stands, ½” – 6” Dia. Capacity (Depending on Workrest), 4-3/4” Dia. X 7-1/2” Long Grinding Wheel Spindle, 4” Dia. X 5-1/2” Long Regulating Wheel Plain Bearing at Front, 2-5/8” Dia. X 3-3/4” Long Regulating Wheel Plain Bearing at Rear, 24” Dia. X 12” Hole X 4” – 10” Face Grinding Wheel, 14” Dia. X 5” Hole X 4” – 10” Face Regulating Wheel, Hydraulic Contour Truing on Regulating and Grinding Wheels, New 50 HP Spindle Motor, Coolant Tank and Pump, Reconditioned By Grinders Clearing House 2004 at Cost of $40,000 Call for Rebuild Invoice (Reconditioned 2004)
Cincinnati Model No. 3 EA Centerless Grinder; S/N N/A, Machine Not In Service, Needs Rebuild
Name: Cincinnati Model No. 3 EA Centerless Grinder; S/N N/A, Machine Not In Service, Needs Rebuild
Manufacturer: Cincinnati
Model: Model No. 3 EA
Year:
Quantity: 1
Description:
CINCINNATI Model No. 3 EA Centerless Grinder; S/N N/A, Machine Not In Service, Needs Rebuild
Misc. Parts For Cincinnati Centerless Grinders
Name: Misc. Parts For Cincinnati Centerless Grinders
Manufacturer: Cincinnati
Model:
Year:
Quantity:
Description:
Misc. Parts For Cincinnati Centerless Grinders Including a Disassembled Feed Rack
50’ Long Mfg. Unk. Custom Built Traveling Gantry Manual Shaft Straightening Systems
Name: 50’ Long Mfg. Unk. Custom Built Traveling Gantry Manual Shaft Straightening Systems
Manufacturer: Long Mfg.
Model:
Year:
Quantity: 2
Description:
(2) 50’ LONG MFG. Unk. Custom Built Traveling Gantry Manual Shaft Straightening Systems; Each System w/ Joe Fuller Motorized Tank Turning Rolls w/ Idler Set, 3 Ton X 6’ Span Motorized Track Mounted Gantry System w/ 3 Ton Harrington Chain Hoist w/ Pendant, Approx. 2 Ton Counter Weight Unit
Joe Fuller Steel Roller Motorized Tank Turning Roll Set
Name: Joe Fuller Steel Roller Motorized Tank Turning Roll Set
Manufacturer: Joe Fuller
Model:
Year:
Quantity: 1
Description:
JOE FULLER Steel Roller Motorized Tank Turning Roll Set; (2) Idler Rolls, Pendant Control, Rolls 17” on Centers
100 Ton Edwards Model Jaws IV Hydraulic Ironworker
Name: 100 Ton Edwards Model Jaws IV Hydraulic Ironworker
Manufacturer: Edwards
Model: Model Jaws IV
Year:
Quantity: 1
Description:
100 Ton EDWARDS Model Jaws IV Hydraulic Ironworker; S/N N/A, 2 ½” X 5” X ½” Notching Capacity, 7” X 7” Angle Shear, 14” Flat Shear, 1 ¼” Dia. Hole X 1” Thick Plate Punch Capacity
Bug-O-System Model BVG-5100-CRC Automated Track Guided Welder
Name: Bug-O-System Model BVG-5100-CRC Automated Track Guided Welder
Manufacturer: Bug-O-System
Model: Model BVG-5100-CRC
Year:
Quantity: 1
Description:
BUG-O-MATIC Model BVG-5100-CRC Automated Track Guided Welder; S/N 0891206, 650 Amp Miller Deltaweld 651 DC Mig Welder, Miller Wire Feed (New 2006)
650 Amp Miller Deltaweld 651 DC Mig Welders w/ Miller Wire Feeders
Name: 650 Amp Miller Deltaweld 651 DC Mig Welders w/ Miller Wire Feeders
Manufacturer: MILLER
Model:
Year:
Quantity: 4
Description:
(4) 650 Amp MILLER Deltaweld 651 DC Mig Welders w/ Miller Wire Feeders
500 Amp Westinghouse Arc Welders
Name: 500 Amp Westinghouse Arc Welders
Manufacturer:
Model:
Year:
Quantity: 3
Description:
(3) 500 Amp WESTINGHOUSE Arc Welders
200 Amp HOBART Beta-Mig 2510 Mig Welder
Name: 200 Amp HOBART Beta-Mig 2510 Mig Welder
Manufacturer:
Model:
Year:
Quantity: 1
Description:
200 Amp HOBART Beta-Mig 2510 Mig Welder
200 Amp HYPERTHERM Max 200 Plasma Cutter
Name: 200 Amp HYPERTHERM Max 200 Plasma Cutter
Manufacturer: HYPERTHERM
Model:
Year:
Quantity: 1
Description:
200 Amp Hypertherm Max 200 Plasma Cutter
Phoenix Model 7 Dry Rod Oven; 100 Degree – 550 Degree Temp. Range
Name: Phoenix Model 7 Dry Rod Oven; 100 Degree – 550 Degree Temp. Range
Manufacturer: Phoenix
Model: Model 7
Year:
Quantity: 1
Description:
PHOENIX Model 7 Dry Rod Oven; 100 Degree – 550 Degree Temp. Range
Victor Track Burner
Name: Victor Track Burner
Manufacturer: VICTOR
Model:
Year:
Quantity:
Description:
VICTOR Track Burner
Welding Equipment Consisting of
Name: Welding Equipment Consisting of
Manufacturer:
Model:
Year:
Quantity:
Description:
Welding Equipment Consisting of; Welding Wire, Welding Rods, Leads, Guns & Other Related Items
10’ W X 18’ L X 6” Thick T-Slotted Cast Iron Floor Plate
Name: 10’ W X 18’ L X 6” Thick T-Slotted Cast Iron Floor Plate
Manufacturer:
Model:
Year:
Quantity:
Description:
10’ W X 18’ L X 6” Thick T-Slotted Cast Iron Floor Plate
36” W X 72” L X 32” High T-Slotted Cast Iron Riser Block
Name: 36” W X 72” L X 32” High T-Slotted Cast Iron Riser Block
Manufacturer:
Model:
Year:
Quantity:
Description:
36” W X 72” L X 32” High T-Slotted Cast Iron Riser Block
24” W X 40” L X 32” High T-Slotted Cast Iron Riser Blocks
Name: 24” W X 40” L X 32” High T-Slotted Cast Iron Riser Blocks
Manufacturer:
Model:
Year:
Quantity: 2
Description:
(2) 24” W X 40” L X 32” High T-Slotted Cast Iron Riser Blocks
50 HP Ingersoll Rand Model SSR-XFE50 Cabinet Enclosed Rotary Screw Air Compressor
Name: 50 HP Ingersoll Rand Model SSR-XFE50 Cabinet Enclosed Rotary Screw Air Compressor
Manufacturer: Ingersoll Rand
Model: Model SSR-XFE50
Year:
Quantity: 1
Description:
50 HP INGERSOLL RAND Model SSR-XFE50 Cabinet Enclosed Rotary Screw Air Compressor; S/N F2093U91
20 HP Ingersoll Rand Model U201-1-SP Horizontal Tank Air Compressor
Name: 20 HP Ingersoll Rand Model U201-1-SP Horizontal Tank Air Compressor
Manufacturer: INGERSOLL RAND
Model: Model U201-1-SP
Year:
Quantity: 1
Description:
20 HP Ingersoll Rand Model U201-1-SP Horizontal Tank Air Compressor; S/N KC905U92F
10 HP Campbell Hausfeld Model CI103120HB Horizontal Tank Air Compressor
Name: 10 HP Campbell Hausfeld Model CI103120HB Horizontal Tank Air Compressor
Manufacturer: Campbell Hausfeld
Model: Model CI103120HB
Year:
Quantity: 1
Description:
10 HP CAMPBELL HAUSFELD Model CI103120HB Horizontal Tank Air Compressor; S/N 2001-00030
Ingersoll Rand model TS250 Refrigerated Air Dryer; S/N 010501, 175 PSIG (New 2001)
Name: Ingersoll Rand model TS250 Refrigerated Air Dryer; S/N 010501, 175 PSIG (New 2001)
Manufacturer: INGERSOLL RAND
Model: model TS250
Year:
Quantity: 1
Description:
INGERSOLL RAND Model TS250 Refrigerated Air Dryer; S/N 010501, 175 PSIG (New 2001)
800 Gallon Vertical Air Receiving Tank
Name: 800 Gallon Vertical Air Receiving Tank
Manufacturer:
Model:
Year:
Quantity:
Description:
800 Gallon Vertical Air Receiving Tank
15,000 LB Hyster Model S150A LP Gas Solid Tire Lift Truck; S/N A024D0571H, 220” 3-Stage Mast, 72” Forks
Name: 15,000 LB Hyster Model S150A LP Gas Solid Tire Lift Truck; S/N A024D0571H, 220” 3-Stage Mast, 72” Forks
Manufacturer: HYSTER
Model: Model S150A LP
Year:
Quantity: 1
Description:
15,000 LB HYSTER Model S150A LP Gas Solid Tire Lift Truck; S/N A024D0571H, 220” 3-Stage Mast, 72” Forks, Auto Transmission with High / Low, Upgraded by Bristol
8,000 LB Daewoo Model D35S Dual Pneumatic Tire Diesel Lift Truck; S/N 21-00254, Two-Stage Mast
Name: 8,000 LB Daewoo Model D35S Dual Pneumatic Tire Diesel Lift Truck; S/N 21-00254, Two-Stage Mast
Manufacturer: Daewoo
Model: Model D35S
Year:
Quantity: 1
Description:
8,000 LB DAEWOO Model D35S Dual Pneumatic Tire Diesel Lift Truck; S/N 21-00254, Two-Stage Mast, 144” Max Lift Height, Side Shift
25 Ton X 40’ Approx. Span Pelham Double Girder Top Running Overhead Bridge Crane
Name: 25 Ton X 40’ Approx. Span Pelham Double Girder Top Running Overhead Bridge Crane
Manufacturer:
Model:
Year: 1989
Quantity: 1
Description:
25 Ton X 40’ Approx. Span Pelham Double Girder Top Running Overhead Bridge Crane; S/N 89114, 25 Ton Cable Hoist, Remote Control (New 1989)
15 Ton X 40’ Approx. Span Pelham Double Girder Top Running Overhead Bridge Crane; S/N 870849, 15 Ton Yale Cable Hoist
Name: 15 Ton X 40’ Approx. Span Pelham Double Girder Top Running Overhead Bridge Crane; S/N 870849, 15 Ton Yale Cable Hoist
Manufacturer:
Model:
Year: 1987
Quantity: 1
Description:
15 Ton X 40’ Approx. Span Pelham Double Girder Top Running Overhead Bridge Crane; S/N 870849, 15 Ton Yale Cable Hoist, Remote Control (New 1987)
15 Ton X 40’ Approx. Span Pelham Double Girder Top Running Overhead Bridge Crane; S/N 870849, 15 Ton Yale Cable Hoist
Name: 15 Ton X 40’ Approx. Span Pelham Double Girder Top Running Overhead Bridge Crane; S/N 870849, 15 Ton Yale Cable Hoist
Manufacturer:
Model:
Year: 1987
Quantity: 1
Description:
15 Ton X 40’ Approx. Span Pelham Double Girder Top Running Overhead Bridge Crane; S/N 870849, 15 Ton Yale Cable Hoist, Remote Control (New 1987)
3 Ton X 29’ Approx. Mfg. Unk. Span Double Girder Top Running Overhead Bridge Cranes; Each w/ 3 Ton Robbins and Meyers Cable Hoists
Name: 3 Ton X 29’ Approx. Mfg. Unk. Span Double Girder Top Running Overhead Bridge Cranes; Each w/ 3 Ton Robbins and Meyers Cable Hoists
Manufacturer:
Model:
Year:
Quantity: 2
Description:
(2) 3 Ton X 29’ Approx. Mfg. Unk. Span Double Girder Top Running Overhead Bridge Cranes; Each w/ 3 Ton Robbins and Meyers Cable Hoists, Pendant Control
(2) 15 Ton X 30’ Span Spreader Bars
Name: (2) 15 Ton X 30’ Span Spreader Bars
Manufacturer:
Model:
Year:
Quantity: 2
Description:
(2) 15 Ton X 30’ Span Spreader Bars
(5) ¼ Ton X 20’ Arm Column Mount Jib Cranes
Name: (5) ¼ Ton X 20’ Arm Column Mount Jib Cranes
Manufacturer:
Model:
Year:
Quantity: 5
Description:
(5) ¼ Ton X 20’ Arm Column Mount Jib Cranes
Large Quantity of Lifting Accessories
Name: Large Quantity of Lifting Accessories
Manufacturer:
Model:
Year:
Quantity:
Description:
Large Quantity of Lifting Accessories Consisting of; Lifting Magnet, Chain Falls, Clevises, Sheet Lifters, Cable Chokers, Nylon Straps & Other Related Items
(3) 7-1/2 Ton X 26’ Approx. Span Pelham Double Girder Top Running Overhead Bridge Crane
Name: (3) 7-1/2 Ton X 26’ Approx. Span Pelham Double Girder Top Running Overhead Bridge Crane
Manufacturer:
Model:
Year:
Quantity: 3
Description:
(3) 7-1/2 Ton X 26’ Approx. Span Pelham Double Girder
Top Running Overhead Bridge Cranes; Each w/ 7-1/2 Ton
Robbins & Myers Cable Hoist, (2) w/ Remote Controls and (1) w/
Pendant Controls (New Approx. Late 1980’s)
Real Eastae - Heavy Craned Machine Shop Building
Name: Real Eastae - Heavy Craned Machine Shop Building
Manufacturer:
Model:
Year:
Quantity:
Description:
HEAVY CRANED MACHINE SHOP BUILDING
Prime Location Approx. 1-1/2 Miles Off I-59
TO BE OFFERED AT PUBLIC AUCTION AT 11:00 AM
32,727 +/- Sq. Ft. Heavy Craned Machine Shop / Warehouse on Approx. 3 Acres; 32,727 +/- Sq. Ft. Gross Building Area, 27,375 Sq. Ft. Craned Shop Space, 2,800 Sq. Ft. Office Area, 40’ Approx. Span X 275’ Long Full Length Main Crane Bay w/ 50 Ton Crane Rail Capacity and (1) 25 Ton Crane, 25’ Approx. Span X 275’ Long Full Length Aux. Crane Bay w/ 30 Ton Crane Rail Capacity and (1) 7-1/2 Ton Crane, 3 Acre Partially Paved Fenced Lot, (2) 22’ Wide Side by Side Ground Level Doors End Building, (2) 22’ Wide Opposed Doors on Side of Building, 900 Amp 277/480 Volt 3-Phase Alabama Power Electrics, City Gas and Water, 1-1/2 Miles off I-59 at Exit No. 143 Deerfoot Parkway
Subject to High Bid Confirmation by Owner, Subject to Prior Sale, Subject To Withdraw by Owner, 6% Buyers Premium In Effect For Real Estate, Offered Live On-Site Only, No Internet Bidding Available on the Real Estate
Real Estate Terms of Sale: To Be Offered Live Onsite only, 6% Buyers Premium on the Real Estate, $10,000.00 Down in Cash or Certified Funds sale day. A 6% Buyers Premium on the Real Estate will be added to the high bid to determine contract price. High bidder will be required to sign a “Contract to Purchase” for the amount at the sale’s conclusion. Owner will have 48 hours to accept, or reject high bid. If accepted the balance will be due at closing within 60 days of auction. If the bid is not accepted buyer’s deposit will be refunded promptly. Seller will present buyer a General Warranty Deed at closing. Occupancy shall be given upon closing. Taxes will be prorated until closing. Property will sell on an “as is” basis. There shall be no warranty of any kind given with regards to the premises, other than title; all implied warranties shall be disclaimed. Announcements at the time of sale will take precedent over all information provided in advertisements. Call for complete terms and information package.
For More Information Contact:
Red Rock Realty Group | Henry Seibels, III, Broker
D: 205.930.1782 | O: 205-324-3383
hseibels@redrockrg.com | www.redrockrg.com
